Tag: Chaintech VNF3-250

Chaintech VNF3-250 Doesn’t POST and beeps once…

0 Comment

I guess I asked for it, upgraded from a 75GB drive to a 750GB (!!) drive and things were working fine until I actually put the drive into the computer and now nothing happens. I get one beep and then the system just hangs! “OC Forum”:http://www.ocforums.com/showthread.php?t=266936 has a very useful what to do on a…

Chaintech VNF3-250 and OCZ PC4000 2GB Platinum

0 Comment

AnandTech – Chaintech VNF3-250 Motherboard Question. Well, I’ve just lost another memory module. Been running 2x512MB PC3700 OCZ Gold Rev 2 for a while now in the Chaintech rig, but I’ve been getting random BSODs. Ran memtest and see intermittent errors on the first stick, so I bought some fancy OCZ PC4000 Platinum’s for the…

No nVidia GART in PCIe systems and never nVidia IDE

0 Comment

DFI Forums – NF4 SLI-D – tweaking windows (video for NF4 LanParty) *mirror added*. _OK, this clears up the myths about what to do about when you need the various nVidia drivers, it is confusing because in fact, on modern systems, you don’t want any of it but the video drivers…._ In a PCI-Express system,…

DiamondMax 10 not recognized fixed with Autodetect NONE

0 Comment

DFI Forums – [Resolved] resolution for disappearing Maxtor drives? (post #12). _The old fix was to update the firmware, but you need to actually buy a vanilla SATA drive card so I just instead spent another $120 and got a later Maxtor, but now I see there is a simpler fix, what is happening is…

nForce3 and 6800GT Stuttering

0 Comment

GeForce 6800 and random freezes – Page 97 – nV News Forums. Some folks still have this problem. Turning Fast Writes seemed to help and getting rid of the nVidia IDE driver, but now people are saying that upgrading to the 80 series nVidia drivers really helps. I’m at 77.77, so here goes on to…

© All Right Reserved